- Premium SWIFTPRO Roller Blind system
- Chose from two excellent quality motors:
- SOMFY 230vAC Quiet Relay Operated motor (3-core cable)
- NEWBLINDS 230vAC Quiet Relay operated motor (4-core cable)
- Ideal for wired integration with smart home systems
- Choice of hem bar finishes
- Order FREE fabric samples
Measuring and Installation is Simple: Download our Measuring Guide (PDF)
Our NEWBLINDS 230vAC Quiet Relay operated motor comes come prepared with 2m of 4-core cable for 230v power supply and control. The pre-fitted motor cable incorporates a male/female connector 15cm from the head of the motor, which allows the motor to be easily disconnected once wired-in, without requiring a qualified electrician. Limits are mechanical and are set and adjusted at the head of the motor using an allen key style tool.
SOMFY's Sonesse 40 WT motor is a 230vAC relay operated motor with mechanical limits and the quiet operation you would expect from a Somfy motor. Upper and lower limits are set mechanically at the motor head. The 3-core cable can be wired back to a controlling relay. It is important as with all mechanical relay operated motors that multiple blind motors are not cabled back to a single relay unit.
Blinds are manufactured using our premium SWIFTPRO roller blind system. Available to order online, there are a range of finishing touches including:
-Fabric Roll: from the window side of the tube or on the room side of the tube.
-Choice of Bottom Bar - including fabric covered, exposed circular aluminium in white, silver-grey or black.
-Choice of motor position - The motor sits inside the roller blind tube and can go on either side of the blind.
In addition to those options available on-line, we have the following options which are available via our estimates team:
For more information about these options - please contact our estimates team by filling out our project enquiry form.
Blinds up to (and including) 2400mm wide will be manufactured with a 43mm outside diameter tube. To prevent tube deflection and fabric sag, blinds above 2400mm wide will use our 56mm outside diameter tube. Please note that a blind using a 56mm roller tube will operate at a slightly faster speed than a blind using a 43mm tube.
Don't forget that you can order free samples of fabric, which will be sent by first class post
Blinds using relay operated motors can be integrated with many brands of smart home automation system that use simple blind control relays. Examples of compatible smart home systems include Fibaro, Lightwave, Control4, Crestron, KNX.
See our guide to measuring roller blinds (clicking this link opens a new window).
A relay operated roller blind is a roller blind incorporating a motor that is controlled by wire using a blind control (also known as a relay). A mains relay unit provides directional power at 230vAC to switch your blind up and down.
To control a relay operated roller blind, there will need to be in place a wired blind controller, which is also often referred to as a relay. Blind controls are often provided (or purchased) as part of smart home systems or a building management system (BMS). Commonly, one blind control unit can contain one or multiple switching relays. For example, a blind controller can have 1, 2, or 4 relays. Each relay should be used to control a single blind.
Operation by a relay is a very well established method of control. So most brands of smart home systems and BMS offer compatible blind relays. These brands range from established high-value smart home systems such as Lutron, Crestron, Control4, KNX and RAKO to a newer breed of more "DIY" modular systems such as Lightwave and Fibaro.
No, relay operated blinds cannot be controlled using wireless controllers such as radio or infrared handsets.
If your relay operated blinds are going to be controlled by a smart home system, then the smart home brand that you are working with may well be compatible with a voice assistant like Alexa or Google assistant. Examples of smart home brands that work with Alexa are Control4 and Fibaro. We'd advise you to consult your smart home supplier or installer to confirm this.
The key advantages of a relay operated blind system are cost, simplicity, reliability and range. You can read a more detailed answer to this question in our article "Why choose relay operated electric blinds?"
If you are planning on using electric blinds in conjunction with a smart homes system or building management system, then relay operated blinds are a good solution. However there are some planning, budgetary and functionality considerations you will need to take into account. These considerations will become disadvantages if you do not address them at early on in the process of your build or renovation. You can read more about this also in our blog post "Why choose relay operated electric blinds?".
You can see instructions for measuring for blinds at the link. Please bear in mind that the widest point of a roller blind is the top - so we'd advise paying particular attention to the width at the top of the recess. It's no problem for a roller blind to be too big on the drop as the excess fabric can simply remain on the tube!
So in terms of fitting the blinds themselves, you can refer to these electric blinds fitting instructions, which are specific to our SWIFTPRO system featured on this product page. You should also consider that there are a couple of other aspects to the correct installation of a relay operated roller blind - namely the cabling, the connections and the configuration of the blind. These are covered in more detail in the remaining questions below.
No, relay operated blinds do not have fitted with a plug, because the cable of the motor is used to both power and control the blind. The cable needs to be wired back to a blind relay which will provide directional power to switch the motor.
We have a choice of two motors for our relay operated roller blinds. Somfy Sonesse 40 WT motors come with a 3-core cable. NEWBLINDS Quiet relay motor has a 4-core cable.
Our NEWBLINDS Relay Operated Motors have a 4-core cable. You will need a blind control that is capable of switching a 4-core cable. The colour-coding of the individual cores are as follows:
Somfy Sonesse 40 WT motors do not have an earth cable, so only have 3-cores, but the colouring is otherwise the same.
We would suggest running a 4-core cable from the location of the relay to the head of the window where each blind will be fitted. Motors can be positioned at either the left or the right-hand side of the blind. Ideally, the cable should enter the recess behind the motor end bracket.
We suggest 4-core because this “future proofs” your cabling should you wish to change to a different specification of motor.
Yes, the cable can be trimmed. Please bear in mind, our NEWBLINDS 230vAC Quiet Relay operated motor comes prepared with 2m of 4-core cable for 230v power supply and control. This cable incorporates a male/female connector 15cm from the head of the motor, which allows the motor to be easily disconnected once wired-in, without requiring a qualified electrician.
If you are planning to use relay operated roller blinds in your blinds project, then it is key that at the planning stage you consider that each blind needs to be switched individually by its own relay. If you connect more than one blind back to a single relay, the blinds will not operate correctly - they may exhibit what is often called 'yoyoing, which is when the blinds bounce up and down. Also, upper and lower and limits are lost over time.
The rated current in the motors used in our mains powered roller blinds is usually 0.5-0.6 Amp, and they have a power rating of between 90-130W. If your blind relay requires a fuse then a 3 amp fuse will be sufficient to protect the cabling and motor.
It's important to consider the installation of electric blinds in terms of the discrete processes involved:
Before connecting your motor cable to your blind relay, you will need to set the top and lower limits of the blind. This prevents the blind from over-running in either direction and possibly causing damage to the blind itself.
Relay operated blind limits are mechanical and are set and adjusted at the head of the motor (see image below) using an allen key style tool. The limits can be adjusted separately. Turning the limit key to the minus symbol reduces the travel of the blind. Turning towards the plus symbol allows the blind to travel further. You can read a more detailed guide to limit setting of relay operated motorised blinds by following the link.
As shown in the diagram below, our SWIFTPRO roller blinds use brackets that project 81mm and have a footprint of 61mm. These sizes include the bracket covers. They can either be top fixed or face fixed. There is a larger bracket available, but this is only necessary for blinds with a very large drop. You can see full details of the SWIFTPRO Roller Blind system by following the link to a full technical specification.
It's important to understand that if you are fitting within a recess, there will be a gap between the recess walls and where the fabric begins. First of all, if you provide "recess sizes", we make a deduction of around 4mm to reach "blind size". This is so that the blind can fit comfortably within the recess. For a roller blind, the blind size (for the width) is the width of the blind from the outside of the left-hand bracket to the outside of the right-hand bracket. Where your blind has bracket covers, these bracket covers will be included in this measurement.
The largest gap is at the motor end of the blind (See M in the diagram below). Between the outside of the bracket and the fabric, you will find the bracket itself and the motor-head - the majority of the motor is concealed within the tube of the roller blind.
And at the idle end (See I in the diagram below), there is the bracket itself and a collapsible pin that locates that end of the blind into the bracket.
So, measuring from outside of the bracket (inc. cover) to the fabric, the sizes of the resulting gaps on each side are approximately:
Remember that the gap at the idle end of the blind (I) is slightly flexible because the idle end-pin is collapsible.
Electric Roller Blinds and Child Safety
Child Safe By Design - Motorised Operation: Electric Roller Blinds can be operated using an integrated motor. We call this ‘Child Safe by design’ as there are no looped cords or chains required to operate the blind.
About Child Safety
At newblinds.co.uk, child safety is of paramount importance. If left hanging freely, chains and cords from blinds can pose a direct threat to children. For this reason, we are working towards all of our products being cord-less or chain-free and therefore “safe by design”.
Where it is not yet feasible to supply a product that is “safe by design”, we ensure that the product is fully compliant with Child Safety legislation. Not only do we ensure that, where necessary, our products are supplied/fitted with child safety cleats/devices, but we also supply, free of charge, these items to our previous customers.
Click the link above to inform us of your requirements. To learn more about the BBSA ‘Make it Safe’ campaign and blind cord safety, you can watch the video below