If you are planning to control a single relay-operated electric blind, curtain rails or roller shutter using a wired switch. Or if you wish to integrate (by wire) with a home or building automation system, then check out our MC P1 Single Blind Relay Controller.
Single Blind Relay Controller:
- controls one 230vAC relay operated blind
- allows wired input for control by wired switch.
- allows wired input for central control by Building Management System (BMS) or Smart Home System
- compatible with blind, curtain and roller shutter motors with 4-core cable (3 core + earth)
- requires 230vAC power
See technical and wiring details for full information.
Provide a single 230vAC power supply to this controller, and connect one 230vAC relay operated blind, curtain rail or roller shutter.
The MC P1 has a 230vAC input which allows control of an individual blind either from a wired wall switch or from a smart home system or BMS. This requires 3x0.75 230vAC cable.
MC P1 also has one volt-free input for central control by BMS or Smart Home System (CAT5 cable required)
- Can control a maximum of 1 blind. Do not connect more than 1 blind to this controller.
- Motor must have 4 core cable (3 core + earth)
- Switches must be latching or depressed during operation (no run-time logic included)
- Smart homes / BMS: A delay must be programmed between switching direction of control.
Accessories for those who wish to control 230vAC relay operated blinds, roller shutters or curtains using wired wall switches or via wired integration with a Smart Home System or Building Management system. Our range of wired blind control accessories are ideal for those who are in a position to plan the cabling and containment required to implement wired blind control.
File Name | Size | Date | |
---|---|---|---|
Technical-Specification-MC-P1-Single-Blind-Relay.pdfDownload | 92.59 KB | 04/11/2023 |