Roman Blind Specification

• Headrail: Deluxe chain-driven headrail with geared 3:1 ratio chain mechanism
• Headrail size: 33mm x 40mm
• Bracket Type: Spring brackets for face or top fixing
• Bracket size: 47mm (d) x 25mm (w) x 25mm (h)
• Operation Method: White plastic, Silver or Brass chain with 'P-clip' child safety wall anchor.
• Operation side: Right or left hand
• Lining options: The rear (window-facing) face of the blind is lined with a plain fabric, which is ivory in colour
  • Standard - 60% Polyester 40% Cotton
  • Thermal - 100% Polyester
  • Blackout - 52% Polyester 48% Cotton
  • Thermal + Blackout (100% Polyester plus 52% Polyester 48% Cotton)

Roman Blind Size Limitations

• Width: Minimum 35cm, Maximum 250cm
• Drop: Minimum 35cm, Maximum 250cm

Roman Blind Fabric Cover Finishing

This roman blind fabric covers will be manufactured with:

• Machine-stitched tapes and bottom bar pocket.
• Clear tag sealed rods and bottom bar.

Fabric cover will be attached to the headrail using industry-standard velcro attachment.

Note:

• Where blackout lining has been ordered, you may notice 'pin prick' stitch holes from where the lining has been attached. This is a bi-product of machine stitching and we take care to limit this.
• Where your chosen fabric has a 'pile' finish, such as those with velvet or suede style finishes, machine stitching may lead to the pile being visibly flattened along the length of any stitching. 
• Roman Blinds are produced to a +/- 5mm tolerance level. This is in addition to any recess deduction. Blinds are custom-made to your measurements and cannot be returned under normal terms and conditions. 

Pattern Matching for Bay Windows and Adjacent Windows

Orders for multiple blinds are not automatically pattern-matched. Please inform us at point-of-order if you are ordering multiple patterned blinds which will be installed next to each other, for example in bay windows. Where this is the case, will ensure the best possible pattern matching. 

Wide Roman blinds and Pattern matching

If your blind is wider than the roll width of the fabric, then your blind will have two vertical joins. Efficient pattern matching will be applied where appropriate.

Recess Depths

If you are installing this roman blind within a window recess, the window's recess will require a minimum recess depth of 4.5cm.

Child Safety for Roman Blinds

Roman blinds are supplied with a 100cm drop white plastic continuous chain as standard with a child safety p-clip wall anchor to keep the chain safely tensioned. As a standard child safety feature, lifting cords run through break-away clips on the back of the fabric. Under excess load, the clips will come free of the lifting cords and can easily be re-attached. 

Roman Blind Installation:

All our blinds come with all the fittings you'll need, along with instructions for easy installation.

VERSAILLES

Versailles Champagne Roman Blinds

-30%

£84.82

From £59.38

£49.48 + VAT

Order Free Sample

Sample added

Versailles Diamond Roman Blinds

-30%

£84.82

From £59.38

£49.48 + VAT

Order Free Sample

Sample added

Roman Blinds and Child Safety

Child Safe - Continuous Loop Chain with Child Safety Anchor: This product can be operated with a continuous loop of chain (in plastic or metal) which is secured to the wall/fixing surface with a child safety anchor. In accordance with child safety legislation, the chain will be manufactured at 1 metre in length. Child safety devices have been fully tested in compliance with British safety standard EN13120. You will find details of how to install the devices in the installation instructions. Please contact our friendly customer service team if you need any further advice. Please note that beds, cots and other items of furniture should not be positioned next to operating chain, in order that the chain remain out of reach.

About Child Safety
At newblinds.co.uk, child safety is of paramount importance. If left hanging freely, chains and cords from blinds can pose a direct threat to children. For this reason, we are working towards all of our products being cord-less or chain-free and therefore “safe by design”.
Where it is not yet feasible to supply a product that is “safe by design”, we ensure that the product is fully compliant with Child Safety legislation. Not only do we ensure that, where necessary, our products are supplied/fitted with child safety cleats/devices, but we also supply, free of charge, these items to our previous customers.

Click the link above to inform us of your requirements. To learn more about the BBSA ‘Make it Safe’ campaign and blind cord safety, you can watch the video below.