Shop Online

0017 Magma

-Venetian blinds custom-made to your specification.
-Buy online with low prices and fast delivery.
-Top Quality 25mm Slatting in a wide range of colours/finishes.
-Adjust slat angle for light and glare control and privacy.
-Raise for a complete view out
-Optional Extras: Uniwand and Side Guide Wires
-Simple Measuring and Installation: Download Measuring Guide (PDF)

-35%
RRP
£32.04
RRP
Discounted Price
£20.83
Net: £17.36+20% VAT
Blinds Delivered: 5 Working Days
Enter Your Sizes
mm
mm
My Sizes Are
Control Side
Tilting of Venetian Blind Slats is performed by twisting a transparent operating rod, which can be positioned either on the left or right hand side of the head-rail.
Raising and Lowering of Venetian Blind Slats is performed using an operating cords which can be positioned either on the left or right hand side of the head-rail. The cord control has a locking mechanism, which allows the slats to be raised to a specific position.
Uniwand is a transparent operating wand, which can be twisted to tilt the slats. The cord, which is used to raise and lower the slats, runs through the wand itself. The uniwand can be positioned either on the left hand side or right hand side of the blind head rail.
For child safety purposes, operating cords are supplied with a cleat which is used to tie back the cord when the slats are raised. For uniwand, the cleat is attached to the wand. Where uniwand is not chosen the cleat is separate and will need to be screwed to the wall next to the cord. Where this is the case, the cleat should be fixed no less than 1.5 metres from floor level.
 
Side Guide Wires
Side guide wires are useful when blinds are being installed to a pitched window. Or an opening pane such as a door or tilt and turn window. The guide wires run down each side of the blinds through holes punched in the slats and are fixed at the bottom of the blind.
Hold Down Brackets
An alternative to side guide wires, for tilt and turn windows or backs of doors, are "hold down brackets", which are fixed at the bottom of the blind. The bottom bar of the blind simply clicks into the brackets. However, it is important to note that the bottom bar will need to be manually clipped and unclipped to the brackets each time you raise or lower the blind. 
Certified Secure Payments | Trusted Shopping
  

Specification

  • Rollwidth: 0
  • Design: Plains
  • Fabric Brand: Newblinds.co.uk